Playback & Recording

Playback & Recording

System does not detect hard disk
System can not detect hard disk. There are following possibilities: HDD is broken. HDD ribbon is damaged. HDD cable connection is loose. Main b...
Sat, 9 Apr, 2016 at 11:22 AM
Motion detection function is not working.
Motion detection function does not work. There are following possibilities: Period setup is not correct. Motion detection zone setup is not correct...
Sat, 9 Apr, 2016 at 11:23 AM
Unable to Playback Recordings
Unable to Playback Recordings Check that HDD is detected by NVR "Record Status" is set to, "Enabled" on all channels Check, &qu...
Sat, 9 Apr, 2016 at 11:23 AM
Alarm signal can not be disarmed
Alarm signal can not be disarmed Alarm setup is not correct Alarm output has been open manually Input device error or connection is not correct ...
Tue, 19 Apr, 2016 at 2:16 PM
Alarm function is null
If you are experiencing a nonfunctional or non working alarm then you might want to consider that you have hooked up the alarm incorrectly. Here are some ...
Sat, 9 Apr, 2016 at 11:34 AM
Record storage period is not enough.
Record storage period is not enough. You may have the record schedule set to motion and schedule recording. Which will make the video file short. HDD...
Sat, 9 Apr, 2016 at 11:35 AM
The displayed video is not full in the monitor.
The displayed video is not full in the monitor. Please do the following: Check your physical connections from the system to the monitor. If a VGA c...
Sat, 9 Apr, 2016 at 11:35 AM