• Connect a ethernet cable from camera to NVR Then connect a RJ45 cable from NVR to PC.
  • Set PC and Camera on same Network.

Set the IP address of the PC/ laptop same as the camera.

Here's how:

Step 1: Right Click on the Windows Start up ➞ Click on Control Panel.

set ip locally wiki 1.png

Step 2: Click on Network and Internet ➞ Select Network Sharing Center ➞ Select on Change Adapter Settings ➞ Select Ethernet

set ip locally wiki 2.png

set ip locally wiki 3.png

set ip locally wiki 4.png

set ip locally wiki 5.png

Step 3: Select the Network Tab ➞ Check off Internet Protocol Version 4 (TCP/IPv4) ➞ Click on Internet Protocol Version 4 to highlight ➞ Click on Properties

set ip locally wiki 6.png.

Step 4: Set IP Address in the same range as the IP Camera Address. Ensure the Subnet Mask and Default Gateway of the PC are the same from the camera. Click OK .

set ip locally wiki 7.png